下载手机汽配人

翻译求助: 装载机操作注意事项!!

装卸机器时的注意事项 机器的装卸始终存在潜在的危险,应该极为小心。机器装卸时,发动机要低速运转,机器要低速行走。 机器装卸要在坚固的平地上进行。与路边保持安全距离。 机器装卸要始终将运输车的车轮固定好。 要使用专用装卸平台,或具有足够强度的专用支架。要保证支架有足够的宽度和长度,以提供一安全装卸的斜坡,斜坡与地面之间的夹角不能超过15º。斜坡之间的距离要与机器的轮距相适应。 确保专用支架牢固定位,两边高度一致。 确保专用支架斜坡表面清洁,无润滑剂、油渍、冰和松散的材料。将机器轮胎上的污物清除掉。 绝不可在斜坡上转向。如有必要,机器应驶离斜坡,调整好方向之后再次开上去。 装车运输时,应在装车后,将机器轮胎楔住,把机器用钢丝绳扎紧。
问 提问者:网友 2017-06-10
最佳回答
Handling machinery at the Attention machines handling the potential danger always exists, it should be very careful. Loading and unloading machines, engines to low-speed operation, low-speed machines to run. machines working in the firm on the ground. And maintain a safe distance from the roadside. handling machines should always be properly fixed the wheel transporter. To use the platform for loading and unloading, or have sufficient strength for the stent. To ensure there is sufficient support the width and length, to provide a safe working slope, slope and the angle between the ground can not exceed 15 º. The distance between the slopes with a machine Lunju suit. ensure solid support for positioning, a high degree of consensus on both sides. ensure that the special stent surface cleaning, no lubricants, Youzi, ice and loose material. Machinery tires on the dirt removed. can not shift on the slopes. If necessary, pull off the slopes machines, adjusting the right direction again after a boost. loading of transport, should be loading, the machine will tire wedge to live, the machines used wire rope Zhajin.
回答者:网友
产品精选
搜索问答
还没有汽配人账号?立即注册

我要提问

汽配限时折扣

本页是网友提供的关于“翻译求助: 装载机操作注意事项!!”的解答,仅供您参考,汽配人网不保证该解答的准确性。