下载手机汽配人

跪求压力控制阀装配图

跪求压力控制阀装配图哪位大哥有啊小弟急用谢谢了
问 提问者:网友 2017-09-08
最佳回答
控制阀标准汇总GB/T13852-1992 船用液压控制阀技术条件General specification of hydraulic control valves for shipGB/T17490-1998 液压控制阀油口、底板、控制装置和电磁铁标识Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoidsGB/T15623.1-2003 液压传动 电调制液压控制阀 第1部分:四通方向流量控制阀试验方法Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valvesGB/T15623.2-2003 液压传动 电调制液压控制阀 第2部分:三通方向流量控制阀试验方法Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valvesGB/T17213.7-1998 工业过程控制阀第7部分: 控制阀数据单Industrial-process control valves Part 7: Control valve data sheetGB/T17213.8-1998 工业过程控制阀第8部分: 噪声考虑第1节: 实验室内测量空气动力流流径控制阀产生噪声Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valvesGB/T17213.1-1998 工业过程控制阀第1部分: 控制阀术语和总则Industrial--Process control valves Part 1: Control valve terminology and general considerationsGB/T17213.5-1998 工业过程控制阀第5部分: 标志Industrial-process control valves Part 5: MarkingGB/T2514-1993 四油口板式液压方向控制阀安装面Hydraulic fluid power--Four-port directional control valves--Mounting surfacesGB/T8104-1987 流量控制阀试验方法Hydraulic fluid power--Valves--Testing method of flow control valvesGB/T7940.3-2001 气动五气口方向控制阀第三部分: 功能识别编码体系Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functionsGB/T8106-1987 方向控制阀试验方法Hydraulic fluid power--Valves--Testing method of directional control valvesGB/T7940.2-2001 气动五气口方向控制阀第二部分带电气接头安装面Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connectorGB/T8105-1987 压力控制阀试验方法Hydraulic fluid power--Valves--Testing method of pressure control valvesGB/T7940.1-2001 气动五气口方向控制阀第部分: 带电气接头安装面Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connectorGB/T8100-1987 板式联接液压压力控制阀(包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀安装面Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfacesGB/T8098-2003 液压传动带补偿流量控制阀安装面Hydraulic fluid power--Compensated flow control valves--Mounting surfacesJB/T7387-1994(2005复审) 工业过程控制系统用电动控制阀 NF C46-520-1993 工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀液压流动产生噪声实验室测量(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)NF C46-522-1994 工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生噪声预定(EN 534-8-4)(Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)NF E49-080-1-2002 气压液动.五通定向控制阀.第1部分:带电连接器安装接口(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)NF E49-080-2-2002 气压液动.五通方向控制阀.第2部分:任选电气连接器安装接口面(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)NF C46-505-1998 绝缘过程控制阀.第2-3部分:流量容量.试验过程(Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)NF C46-630-1998 工业过程控制阀.第6部分:控制阀与定位器连接用安装细节.第1节:线性传动装置上安装定位器(Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positioner mounting on linear actuators.)NF E29-453-2000 工业过程控制阀门(Industrial process control valves.)NF E29-316-5-2001 供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)NF C46-521-2001 工业过程控制阀.第8部分:噪声问题.第3节:气动控制阀噪声预测法(Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)NF E48-435-1998 液压传动.尺寸02、03和05四端口模式排气阀和四端口方向控制阀.夹紧尺寸(Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)NF C46-519-2001 工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生噪声(Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)NF C46-531-2001 工业过程控制阀.第6-2部分:定位器装控制阀安装细则.旋转传动装置上安装定位器(Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)NF E49-091-2002 气压传动.控制阀和其部件孔口和控制机械验证(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)XP E29-140-1999 使用气体燃料家用装置控制阀.安全控制阀(带有集自动密闭器)(Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)NF C46-510-2001 工业过程控制阀.第3-1部分:尺寸.双通球型直立式控制法兰阀门面对面尺寸和双通球型角度控制法兰阀门心(Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)NF C46-511-2001 工业过程控制阀.第3-2部分:尺寸.蝶阀除外旋转控制阀门面对面尺寸(Industrial-process control valves - Part 3-2 : dimensions - Face-to-face dimensions for rotary control valves except butterfly valves.)NF E49-090-2-2003 气压传动.18mm和26mm五气口方向控制阀.第2部分:带光学电接头安装面(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.)NF C46-512-1999 工业处理控制阀.第3-3部分:尺寸.对焊接头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN 60534-3-3)(Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.)ANSI/IEEE 1290-1996 核发电站电动控制阀门马达应用、防护、控制和试验指南(Guide for MOV (Motor-Operated Valve) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations)ANSI/FCI 87-2-1990 弹簧模板驱动控制阀动力信号标准(Power Signal Standard for Spring-Diaphragm Actuated Control Valves)ANSI/ISA 75.08.02-2003 无凸缘控制阀端面间尺寸(级别150、300和600) (Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) )ANSI/ISA S 75.08.03-2001 承插焊接端头和螺旋端头球状控制阀面面尺寸(Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))ANSI/ISA 75.08.06-2002 带凸缘球型控制阀体面对面尺寸(类型900、1500和2500) (Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) )ANSI/ISA 75.08.05-2002 端头对焊球型控制阀面对面尺寸(类型150、300、600、900、1500和2500) (Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) )ANSI/ISA 75.01.01-2002 尺寸控制阀用流量方程式 (Flow Equations for Sizing Control Valves )ANSI/ISA 75.08.01-2002 整体式带凸缘球型控制阀体面对面尺寸(类型125、150、250、300和600) (Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) )ANSI/ISA S 75.19.01-2001 控制阀静水试验(Hydrostatic Testing of Control Valves)ANSI/ISA S 75.08.04-2001 对焊端头球状控制阀面面尺寸(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves)ANSI/ISA S 75.08.07-2001 独立法兰球状控制阀面面尺寸(Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600))ANSI/(NFPA) T 3.5.14 R1-1997 液力传动.直接控制阀门.分界特性测定方法(Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics)ANSI/(NFPA) T 3.21.8-1990 气压液动.反应时间测量.直接控制阀门(Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves)ANSI/ISA S 75.15-1993 对焊端球状控制阀面对面尺寸(ANSI等级150、300、600、900、1500、2500)(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500))ANSI/FCI 91-1-1997 控制阀门密封质量标准(Standard for Qualification of Control Valve Stem Seals)ANSI/UL 753-1996 消防装置用自动供水控制阀警报附件(Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service)BS EN 60534-2-5-2003 工业过程控制阀.流通能力.通过有段间恢复功能多段控制阀流体流量校准公式(Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery)ASTM F 1985-1999 气力操作球形控制阀标准规范(Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves)BS EN 60534-3-2-2001 工业过程控制阀.尺寸.蝶形阀除外转式控制阀端面距(Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves)BS ISO 15407-2-2003 气压传动.五气口方向控制阀,规格18mm和26mm.有任选电接头安装接口(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector)BS ISO 12238-2001 气压液动.方向控制阀门.转换时间测量(Pneumatic fluid power - Directional control valves - Measurement of shifting time)BS ISO 5599-1-2001 气压液动.五通方向控制阀.带电连接器安装接口表面(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector)BS ISO 5599-2-2001 气压液动.五通方向控制阀.任选电气连接器安装接口面(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector)BS EN 60534-6-2-2001 工业过程控制阀.定位器装控制阀安装细则.旋转传动装置上安装定位器(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators)BS EN 1074-5-2001 供水阀门.适用性和专用要求试验.控制阀门(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves)BS EN 60534-8-3-2000 工业流程控制阀.噪声问题.控制阀空气动力噪声预报法(Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method)BS EN 60534-2-3-1998 工业过程控制阀.流量.试验程序(Industrial-process control valves - Flow capacity - Test procedures)BS EN 60534-8-1-2001 工业过程控制阀.噪声问题.通过控制阀动力噪声实验室测量(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves)BS EN 60534-3-1-2000 工业过程控制阀.尺寸.带法兰两路、球型、直立式控制阀门面对面尺寸和带法兰两路、球型、角度控制阀门(Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter)BS EN 1349-2000 工业处理控制阀门(Industrial process control valves)BS ISO 15407-1-2000 18mm和26mm五气口气动方向控制阀.无电插头安装界面(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector)BS ISO 11727-1999 气动流体力学.控制阀和其元件控制机械装置和气门识别(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components)BS EN 60534-3-3-1998 工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀末端对末端尺寸(Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves)BS EN 60534-2-1-1999 工业过程控制阀 .流容.安装条件下液流规模方程(Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions)BS ISO 6263-1997 液压传动.补偿式流量控制阀.装配面(Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces)BS ISO 10770-2-1998 液压传动.电模式液压控制阀.第2部分:三向流动控制阀试验方法(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves)BS ISO 10770-1-1998 液压传动.电模式液压控制阀.第1部分:四向流动控制阀试验方法(Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves)BS EN 60534-6-1-1998 工业过程控制阀 .控制阀调节器连接用安装元件.直线传动装置上调节器安装(Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators)BS ISO 7790-1998 液压传动.规格03和05型四油口标准设计叠阀和四油口定向控制阀.紧固尺寸(Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions)EN 60534-8-1-2000 工业过程控制阀 第8部分:噪声考虑 第1节:气动流流径控制阀产生噪声实验室测量Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)EN 60534-8-4-1994 工业过程控制阀 第8部分:噪声问题 第4节:流动产生噪声预测Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)EN 60534-8-3-2000 工业流程控制阀 .第8-3部分 噪声问题 通过控制阀动力噪声预测法Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000)EN 1074-5-2001 供水阀门 目要求适应性和合适认证试验 第5部分:控制阀门Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valvesEN 60534-3-1-2000 工业过程控制阀 第3-1部分:尺寸 法兰双通球形直型控制阀端面间距尺寸和有法兰双通球型角型控制阀Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000)EN 60534-2-1-1998 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量校准公式Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998)EN 60534-1-1993 工业过程控制阀 第1部分 控制阀术语和般考虑Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)EN 60534-3-2-2001 工业过程控制阀 第3部分:尺寸 第2节:无法兰控制阀(薄型蝶阀除外)端面间距尺寸Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)EN 60534-3-3-1998 工业过程控制阀 第三部分:尺寸 对接焊接 两向 球型 垂直模式控制阀末端对末端尺寸Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)EN 60534-6-1-1997 工业过程控制阀 第6-1部分:定位器联控制阀执行机构安装细则 第1节:直线传动装置上调节器安装Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)EN 60534-6-2-2001 工业过程控制阀 第6-2部分:定位器联控制阀执行机构安装细则 环形执行机构定位器Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)EN 60534-8-2-1993 工业过程控制阀 第8部分 噪声考虑 第2节通过控制阀流体产生噪声实验室测量报法Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991)EN 60534-2-3-1998 工业过程控制阀 第2部分:流通能力 第3节:试验规程Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)prEN 13959-2000 公称压力DN6至DN250(含DN250)防污染控制阀 E族A、B、C和D型Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and DprEN 60534-4-1998 工业过程控制阀 第4部分:检验和常规试验 草案IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testingEN 1349-2000+AC-2001 工业加工控制阀门Industrial process control valvesEN 60534-2-5-2003 工业加工控制阀 第2-5部分:流量 通过带级间恢复多级控制阀流体尺寸方程 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement noticeBS ISO 4401-1996 液压传动.四油口定向控制阀.装配面(Hydraulic fluid power - Four-port directional control valves - Mounting surfaces)BS EN 60534-1-1989 工业过程控制阀 .第1部分:控制阀术语和般考虑(Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations)BS EN 60534-8-4-1994 工业过程控制阀.第8部分:噪声问题.第4节.流动产生噪声预报(Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow)BS EN 60534-8-2-1991 工业过程控制阀.第8部分:噪声考虑.第2节:通过控制阀流体产生噪声实验室测量(Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves)BS 6494-4-1989 液压阀安装面.第4部分:03和05规格四孔组件排气阀、模数组阀和方向控制阀夹紧尺寸规范(Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves)BS 5793-4-1987 工业过程控制阀.第4部分:检验和例行试验规范(Industrial-process control valves - Specification for inspection and routine testing)BS 5944-4-1984 液压动力系统和部件所产生空气噪音测量.第4部分:流量和压力控制阀声功率级测定方法(Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure)BS 5793-5-1984 工业过程控制阀.第5部分:标记规范(Industrial-process control valves - Specification for marking)BS 1655-1950 过程控制工业用法兰连接自动控制阀(面至面尺寸)规范(Specification for flanged automatic control valves for the process control industry (face-to-face dimensions))DIN EN 60534-2-3-1998 工业过程控制阀.第2-3部分:流量.检验方法(Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998)DIN EN 60534-6-1-1998 工业流程控制阀.第6部分:调节阀门驱动位置调节器固定用
回答者:网友
产品精选
在移动端查看: 跪求压力控制阀装配图
搜索问答
还没有汽配人账号?立即注册

我要提问

汽配限时折扣

本页是网友提供的关于“跪求压力控制阀装配图”的解答,仅供您参考,汽配人网不保证该解答的准确性。