汽配人首页 > 问答首页

滑模摊铺机英文产品说明书请专家帮忙翻译

New box design with durable 0.5 inch (13 mm) paving skin Vertically-adjusting mold mount for precise leveling of mold to machine Telescoping end sections with 12 inches (305 mm) of width variation on each side are available Standard paving depth is zero to 24 inches (610 mm)Edge slump adjustment Hydraulic Vertical Hinged Sideplates, self-contained inside the mold for track clearance Split, pressure-compensated sideplates Folding side plate wings for transporting without removing Pivoting mold mounting beam to eliminate stress points Self-supported TA is hydraulically driven with 3.5 inch (89 mm) ACME screws for up to a six inch (152 mm) crown Front and rear top T-bar on mold for attaching accessories and structural integrity Inserts are bolted together with front and rear alignment pins for easy mold assembly New vibrator mounting tube attaches to T-bar on mold– Vertical vibrator lift– Rear lubrication system with grease zerks accessible from the work bridge New strike-off– Mounted on paver frame T-rail, independent of the mold– New modular design with wedge lock system for ease in changing widths– 10 inches (254 mm) of hydraulic height adjustment– Hydraulic crown adjustment Spreader plow mounted to paver frame T-rail, optional auger available Tamper bar optional: 问提问者：网友 | 2017-06-07

最佳回答

新的持久的0.5英寸（13毫米）铺路皮肤垂直调整模具的模具精密水准测量安装到机伸缩与12英寸（305毫米），每边宽度的变化，可深度年底路段铺设标准箱的设计是0到24英寸（610毫米）的边缘低迷调整液压垂直棚Sideplates，自我清除轨道内的斯普利特，模具内的压力补偿sideplates不删除旋转折叠梁运模具安装，以消除应力点的自我支持电讯局长的水流侧板翅膀驱动的3.5英寸（89毫米）到6英寸（152毫米）冠顶前后T型杆附着在模具配件和结构完整的螺栓插入与前面和后面，便于模具组装在一起越峰螺丝对准针脚重视新振动器安装到T管杆的模 - 垂直振动器升降机 - 从后与油脂zerks桥新的工作访问取得过润滑系统 - 框架式摊铺机上的T -铁路，模具独立 - 新的模块化设计，为便于楔锁系统，改变宽度 - 10英寸（254毫米）高度调节液压 - 液压冠调整安装在摊铺机摊铺机犁架T型导轨，可选用螺旋篡改栏可选: 回答者：网友

产品精选

我来回答